Sharp AR-M451N specifications 3-10, Staple cartridge replacement, Reinstall the staple box

FINISHER

Staple cartridge replacement

When the staple cartridge becomes empty, the message "Add staples." will appear in the message display of the operation panel.

Follow the procedure below to replace the staple cartridge.

1 Open the front cover.

2 Turn the staple unit to face up.

3 Pull the release lever for the staple box and remove the box.

4 Remove the empty staple cartridge from the staple box.

5 Insert a new staple cartridge into the staple box aligning the arrow of the staple cartridge with that of the staple box.

When reinstalling the staple box, push it in until it clicks into place.

NOTES

●Do not remove the tape from the cartridge before inserting the staple cartridge into the box.

●When reinstalling the staple box, push it in until it clicks into place.

6 Remove the tape from the staple cartridge by pulling it straight.

7 Reinstall the staple box.

Push the staple box in until it clicks into place.

8 While pushing the staple unit release lever to the left, rotate the staple unit to face down.

9 Close the front cover.

NOTE

Make a test print or copy in the staple sort mode to ensure that stapling is performed properly.

3-10