Sharp AR-M451N 1-11, Part names and functions of peripheral devices, Part Names And Functions

PART NAMES AND FUNCTIONS

Part names and functions of peripheral devices

(1)

(11)

(10)

(9)

(8)

(7)

(1)Upper exit tray extension (AR-TE4)

Mount this unit to the upper paper exit tray. This extension is needed to support large size paper.

(2)Finisher (AR-FN6)

Output sheets can either be sorted in page order or grouped by page. Sorted sets or groups are offset stacked for easy separation when removed. Sorted sets can be delivered either stapled or unstapled.

(3)Right output tray (AR-TE5)

Attaches to the output outlet on the right side of the machine.

(4)Mail-bin stacker (AR-MS1)

This unit is an output sorter that has seven receiving bins.

The bin to receive printed output can be selected in the printer driver. Each bin can be assigned to receive printed output by an individual person or by groups of people so that their prints are separated from other users making them easy to retrieve.

When this unit is installed, any copies or facsimile prints will be sent to the top tray and not into the mail bins.

(5)Stand/MPD & 2000 sheet paper drawer (AR-D28) This paper feed unit contains an upper multi- purpose drawer (see item (6)) and a lower drawer which can hold a maximum of 2000 sheets of 80 g/m2 (20 lbs.) paper.

(2)

(3)

(4)

(5)

(6)

(6)Multi purpose drawer (AR-MU2)

Up to 500 sheets of 80 g/m2 (20 lbs.) paper can be loaded. Also special papers such as envelopes (standard sizes only) and postcards can be set.

(7)Stand/3 x 500 sheet paper drawer (AR-D27) This paper feed unit contains an upper multi- purpose drawer (see item (6)) and two lower drawers each of which can hold a maximum of 500 sheets of 80 g/m2 (20 lbs.) paper.

(8)Saddle stitch finisher (AR-FN7)

The saddle stitch finisher can automatically place two staples for centreline binding of paper and fold them along the centreline.

An optional punch module is available for installation into the finisher.

(9)Duplex module (AR-DU3)

An optional duplex module must be installed for automatic two-sided printing.

(10)Duplex module/bypass tray (AR-DU4)

This module is basically the same as (9) above with the addition of a manual bypass paper feed unit.

(11)Exit tray (AR-TE3)

Mounted to the paper output port of a duplex module.

1

1-11