You will return to the main screen of copy mode.

SPECIAL MODES

Book copy

This function is convenient when you wish to compile copies of books or other bound originals into an attractive pamphlet format. The two pages of the open book are scanned as a set, and two pages each are copied onto the front and back sides of the copy paper (four pages are copied onto one sheet of copy paper). This allows the copies to be folded down the centre and made into a pamphlet.

[Example] Book copying an 8-page pamphlet

Originals

Finished copies are

 

folded in two.

 

Left binding

First page

First page

Right binding

First page

First page

To display the special modes screen...

See "General procedure for using special functions" on page 5-2.

1 Touch the [BOOK COPY] key in the special modes screen (2nd screen).

When using this function, a duplex module must be installed.

Scan the originals from the first page to the last page. The order of copying will be automatically adjusted by the machine.

Either left binding (right to left turning) or right binding (left to right turning) can be selected.

Four originals will be copied onto one sheet. Blank pages may be automatically produced at the end depending on the number of the originals.

If a saddle stitch finisher is installed, book copy can be used in combination with the pamphlet function to staple and fold the copies at the centreline.

4 Touch the [OK] key in the special modes screen.

5 Place the originals on the document glass. (page 4-3)

Scan the original pages in

5

SPECIAL MODES

COVERS/INSERTS TRANSPARENCY INSERTS

BOOK COPY

 

CARD SHOT

 

 

 

The BOOK COPY

setting screen will appear. The book copy icon ( , etc.) will also appear in the upper left corner of the screen to indicate that the function is turned on.

the following order: Opened front and back cover

Opened inside of front cover and 1st page Opened 2nd and 3rd page

Opened last page and inside of back cover

2 Select whether the book opens to the left or to the right, and touch the [OK] key in the

6 Make sure that the desired paper size has been selected.

book copy setting screen.

 

 

 

 

 

You will return to the

LEFT

 

RIGHT

 

 

 

 

 

special modes screen.

BINDING

 

BINDING

 

 

 

 

 

 

 

 

 

 

 

CO

 

 

 

 

 

SET

 

UTO

EXPOSURE

AUTO A3

PAPER SELECT

100% OPY RATIO

If the desired paper size is not selected, select the desired size.

3 Select any desired cover settings.

7 Select the number of copies and any other desired copy settings, and then press the [START] key.

CANCEL OK

RIGHT

NG BINDING

COVER

SETTING

If you wish to use a different type of paper for the cover, perform steps

4to 12 on pages 5-6 to 5-

If you do not wish to use a different type of paper, continue from step 4.

8 Place the next two pages and press the [START] key. Repeat until all pages have been scanned, and then touch the [READ- END] key.

When book copy is selected, two-sided copying is automatically selected.

To cancel the book copy function, touch the [CANCEL] key in the book copy setting screen (the screen of step 2).

5-25

Page 125
Image 125
Sharp AR-M451N Book copy, Scan the original pages, Opened last page and inside of back cover, You will return to