Sharp AR-M451N Staple cartridge replacement and staple jam removal, 10Close the front cover

SADDLE STITCH FINISHER

Staple cartridge replacement and staple jam removal

When the staple cartridge becomes empty or staples become jammed, a message will appear in the message display of the operation panel.

Follow the procedure below to replace the staple cartridge or remove jammed staples.

■Staple cartridge replacement

1 Open the front cover.

2 Pull out the stapler section.

3 Turn roller rotating knob A in the direction of the arrow to move the staple unit to the front.

Turn the roller rotating knob until the triangle mark is aligned with the index.

Roller rotating

knob A Staple unit

4 Remove the empty staple box.

5 Remove the empty staple cartridge.

Press the lock button to unlock the staple box cover and remove the staple cartridge.

NOTE

If staples remain, the staple cartridge cannot be removed.

6 Insert a new staple cartridge into the staple box.

After inserting the staple cartridge, press down on the staple box cover to lock the cartridge in place.

NOTES

●Do not remove the tape from the cartridge before

inserting the staple cartridge into the box.	3
● Make sure that the staple cartridge is secured
firmly.

●When reinstalling the staple box, push it in until it clicks into place.

7 Remove the tape from the staple cartridge by pulling it straight.

8 Insert the staple box.

Push the staple box in until it clicks into place.

9 Push the stapler section back into the finisher.

10Close the front cover.

NOTE

Make a test print or copy in the staple sort mode to ensure that stapling is performed properly.

3-19