Sharp AR-M451N Normal Copying, Making copies with the automatic document feeder, AUTO A4, 100%

NORMAL COPYING

This section describes the normal copying procedure.

Making copies with the automatic document feeder

■1-sided copies of 1-sided originals

OriginalCopy

1 Place the originals in the document feeder tray. (pages 4-3 to 4-6)2 Make sure that the 1-sided to 1-sided copy

5 Touch the [OK] key.

0

OK

6 Make sure that paper of the same size as the originals is automatically selected*.

4

mode is selected.

				The one-sided to one-
		ORIGINAL	A4
				sided mode is selected
				when no icon for a two-
				sided mode appears in
A4
				the dashed area on the
	A4
	A4
				display. If the 1-sided to
	B4
	A4R

1-sided copy mode is

UTO

EXPOSURE

AUTO A4

PAPER SELECT

100%

The selected tray will be

highlighted or the message "LOAD xxxxxx PAPER." will appear. If the message appears, load paper in a paper tray with paper of the required size.

already selected, steps 3 to 5 are not needed.

3 Touch the [2-SIDED COPY] key.SPECIAL MODES

2-SIDED COPY

OUTPUT

4 Touch the [1-sided to 1-sided copy] key.

Touch the [1-sided to 1- sided copy] key.

Even if the message above appears, copying can be performed onto the currently selected paper.

*The following requirements must be satisfied.

Originals of a standard size (A3, B4, A4, A4R, B5, B5R or A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8- 1/2" x 11"R or 5-1/2" x 8-1/2R")) are set and the auto paper select function is enabled.

						If originals of a size other
READY TO SCAN FOR COPY.
						than the sizes above are
						to be copied, manually
			1.	A4	PLAIN
						select the desired paper
	A4		2.	A3	PLAIN
						size	by	touching	the
	PLAIN		3.	A3	PLAIN
		4.		A4	PLAIN	[PAPER		SELECT]	key
						and	then	touching	the
	desired paper size selection key.

The selected key will be highlighted and the paper selection screen will close. To close the paper selection screen without making a selection, touch the [PAPER SELECT] key.

4-7