Sharp AR-M451N 4-11, Copying from the document glass, 100% OPY RATIO, Exposure, AUTO A4

NORMAL COPYING

Copying from the document glass

When copying originals which cannot be fed from the automatic document feeder such as thick originals, open the document cover and copy the originals from the document glass.

■1-sided copies of 1-sided originals

OriginalCopy

1 Place the original on the document glass. (pages 4-3 to 4-6)

3 Ensure that paper of the same size as the original is automatically selected*.

UTO

EXPOSURE

AUTO A4

PAPER SELECT

100% OPY RATIO

The selected tray will be

highlighted or the message "LOAD xxxxxx PAPER." will appear. If the message appears, load paper in a paper tray with paper of the

4

Original scale	Original scale
mark	mark

A5 or
5½ x 8½	B4 or	A4R or 8½x11R
	8½x14
A4 or 8½x11	A3 or 11x17

●Align the corner of the original with the tip of the

arrow mark on the document glass scale.

●Place the original in the appropriate position for its size as shown above.

2 Ensure that the 1-sided to 1-sided copy mode is selected.

				The one-sided to one-
		ORIGINAL	A4
				sided mode is selected
				when no icon for a two-
				sided mode appears in
A4
				the dashed area on the
	A4
	A4			display. If an	icon
	B4
	A4R			appears, perform	steps

3 to 5 on page 4-7 and then go to step 3.

required size.

Even if the message above is displayed, copying can be performed onto the currently selected paper.

*The following requirements must be satisfied. Originals of a standard size (A3, B4, A4, A4R, B5, B5R or A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8- 1/2" x 11"R or 5-1/2" x 8-1/2"R)) are set and the auto paper select function is enabled.

						If originals of a size other
READY TO SCAN FOR COPY.
						than the sizes above are
						to be copied, manually
			1.	A4	PLAIN
						select the desired paper
	A4		2.	A3	PLAIN
						size	by	touching	the
	PLAIN		3.	A3	PLAIN
		4.		A4		[PAPER		SELECT]	key
					PLAIN
						and	then	touching	the
	desired paper size selection key.

The selected key will be highlighted and the paper selection screen will close. To close the paper selection screen without making a selection, touch the [PAPER SELECT] key.

4-11