Sony SLV-X827MN manual To record satellite broadcasts, To use the VCR after setting the timer

To record satellite broadcasts

If you connect the satellite tuner and the VCR, you can record satellite programmes.

1 Turn on the satellite tuner.

2 On the satellite tuner, select the satellite programme for which you wish to make a timer setting.

3 Repeat the steps described above.

4 Keep the satellite tuner turned on until the VCR finishes recording the satellite programme for which you have made a timer setting.

To use the VCR after setting the timer

To use the VCR before a timer recording begins, just press u. The TIMER indicator turns off and the VCR switches on. Remember to press u to reset the VCR after using the VCR.

You can also do the following tasks while the VCR is recording:

•Reset the counter.

•Display tape information on the TV screen.

•Check the timer settings.

•Watch another TV programme.

Tip

• To cancel the procedure, press G-CODE before pressing SET.

Note

•If the VCR beeps repeatedly, this means that:

–The G-CODE number is incorrect.

–ONCE, DAILY, or WEEKLY was selected incorrectly. You cannot select DAILY or WEEKLY for a programme that airs more than seven days ahead.

Basic Operations

Basic Operations

35

SLV-X827MN 3-858-297-11 (1)