Setting the Security
— Security Menu
When you click in the Administrator menu, the Security menu appears.
Use this menu to limit the computers that can access the camera.
Security functionTo activate the security function, select On.
Default policySelect the basic policy of the limit from Allow and Deny for the computers specified in the Network address/ Subnet 1 to Network address/Subnet 10 menus below.
Network address/Subnet 1 to Network address/Subnet 10Type the network addresses and subnet mask values that you want to allow or deny access to the camera.
You can specify up to 10 network addresses and subnet mask values. For a subnet mask, type 8 to 32.
Select Allow or Deny from the
Tip
The subnet mask value represents the bit number from the left of the network address.
For example, the subnet mask value for “255.255.255.0” is 24.
If you set 192.168.0.0/24 and Allow, you can allow access from computers having an IP address between “192.168.0.0” and “192.168.0.255”.
Note
You can access the camera even from a computer having an IP address whose access right is set to Deny, if you
enter the user name and password set for the Administrator boxes in the User menu.
OK/Cancel
Camera the Administrating
Setting the Security — Security Menu | 57 |
|
|