Camera the Operating
To use this function, you need to make Image memory active and set the details in the Trigger menu of the Administrator menu (page 73).
1 Display the image on the monitor window.
2 Select Image memory from the trigger
3 Click .
The still image of the moment you click is captured, and the image file is recorded.
Controlling alarm output 1, 2You can control Alarm output 1, 2.
To use this function, you need to make Alarm output 1 or Alarm output 2 active in the Trigger menu of the Administrator menu (page 74).
1 Display the image on the monitor window.
2 Select Alarm output1 or Alarm output2 from the trigger
3 Click .
The alarm output is switched by clicking. The alarm output mode can be selected from Toggle or Timer of Alarm output 1, 2 in the Trigger menu (page 74).
Tip
For the connection of peripheral devices to the alarm output of the I/O port, see the supplied Installation Manual.
Controlling Day/Night functionYou can control the Day/Night function On (night mode) and Off (day mode).
To use this function, you need to make Day/Night active in the Trigger menu of the Administrator menu (page 74).
1 Display the image on the monitor window.
2 Select Day/Night from the trigger
3 Click .
Each click switches the Day/Night function alternately between On (night mode) and Off (day mode).
Note
If Day/Night mode in the
You can play the audio file previously stored in the camera using the SNC audio upload tool.
To use this function, you need to make Voice alert1, Voice alert2 and Voice alert3 active in the Trigger menu of the Administrator menu (page 74).
1 Display the image on the monitor window.
2 Select Voice alert1, Voice alert2 or Voice alert3 from the trigger
3 Click .
Playback of the selected audio file starts and the playback sound is output from the speaker connected to the camera.
28 Using the Trigger Button