Setting the Alarm Buffer
— Alarm buffer Menu
When you click in the Administrator menu, the Alarm buffer menu appears.
You can set the
Camera the Administrating
Mode
Displays the video codec selected in the Video codec tab of the Camera menu.
Note
You cannot set the alarm buffer when H.264 is selected in the Video codec tab of the Camera menu.
Codec
Only the currently available codec(s) are active. Select the video codec to be used for the alarm buffer.
Note
When Dual codec is selected in the Video codec tab of the Camera menu and if you select here a video codec different from the priority video codec specified for Dual codec, the bit rate and frame rate for sending/ recording via the alarm buffer may be lower than the set values.
Recording capacityDisplays the maximum recording capacity of the alarm buffer in the present camera setting of the video mode, image size, bit rate and frame rate.
Set the recording time for the
Note
The value of Recording capacity differs depending on the image size and image quality settings in the Camera menu.
OK/Cancel
76 Setting the Alarm Buffer — Alarm buffer Menu