Camera the Administrating

OK button

Click to send the set values to the camera and confirm the settings.

Note

Although the display on the monitor quickly responds to the setting being performed as you change the size of a window or a setting, you need to click the OK button to confirm the setting. The setting will be cancelled if you do not click the OK button.

To set the moving object detection function

Set the moving object detection function as follows:

1 Set the PTZ position.

Select Preset position for PTZ position when you activate moving object detection linked with a preset position. Select Current position when you activate this function regardless of the camera position.

2 Select the camera position where you want to activate the detection function.

When you select Preset position for PTZ position, select the desired preset position from the Position drop-down list, and the camera will move to the selected preset position automatically.

3 Select Moving object for Detection.

The setting items for moving object detection appear.

4 Check the Window 1 check box.

The Window 1 frame appears on the monitor display.

5 Adjust the position and size of Window 1. Drag Window 1 to move it and change its size.

6 Set the active or inactive windows.

Select Active to set Window 1 as an active area, or Inactive to set it as an inactive area.

Note

If an active window and inactive window overlap, the overlapped portion will be regarded as an inactive area.

When the two windows overlap, the inactive window is displayed over the active window on the monitor screen. If the active window is hidden by an inactive window and its position or size cannot be changed, temporarily change the active window

to an inactive window and change the position and size. After changing, reset it as an active window.

7 Set the function for Windows 2 to Windows 4. Repeat steps 4 to 6 for each window.

8 Select the object size for Object size.

Select a larger size if a small noise may be detected as a motion by mistake.

9 Adjust the Threshold setting slider bar to set the threshold level at which the camera executes detection.

Adjust the detection level while observing the monitor screen and actually shooting a moving object.

10 Click OK.

The moving object detection settings are confirmed.

Note

Be sure to click the OK button to confirm the settings. The setting will be cancelled if you do not click the OK button.

11 When Preset position is selected for PTZ position, perform settings for other preset positions. Repeat steps 2 to 10 for each preset position.

Setting items for unattended object detection

The following setting items appear when Detection is set to Unattended object.

Monitor display

Set the active/inactive window while monitoring a moving image.

Active window

Inactive window

80 Setting the Object Detection Function — Object detection Menu