For Macintosh users
Follow the steps below, according to your OS.
OS | Steps |
|
|
Mac OS 8.5.1/8.6/9.0 | Steps 1 to 5 |
|
|
Mac OS 9.1/9.2/Mac OS X | Steps 2 to 5 |
(v10.0/v10.1) |
|
|
|
* For Mac OS 8.5.1, 8.6, or 9.0 users only
1Turn on your computer, and set the supplied CD- ROM into the
The “PIXELA ImageMixer” screen appears.
2
3Click (USB Driver).
The “USB Driver” screen appears.
4
5Drag and drop the following two files from the screen opened in step 3 into the System Folder icon in the screen opened in step 4.
•Sony USB Driver
•Sony USB Shim
6When the message for confirmation is shown, click “OK.”
7Select the desired language.
8Follow the instructions on each succeeding screen.
9Restart your computer and remove the
For details, see page 67.
3Connecting your camera to your computerFor details, see page 68.
Removing the USB cable from your computer or the “Memory Stick” from your camera during a USB connection
Drag and drop the drive icon of the “Memory Stick” to the “Trash” icon, then remove the USB cable or “Memory Stick.”
*If you are using Mac OS X, remove the USB cable, etc., after you have turned your computer off.
76