USB MODE:NORMAL

3

“USB MODE: NORMAL ” appears on the LCD screen. When a USB connection is established for the first time, your computer automatically runs the used program to recognize your camera. Wait for a while.

If “USB MODE: NORMAL” is not shown in step 3,

confirm that [USB] is set to [NORMAL] in [ ] (page 89).

In USB mode, the POWER button, lens cover and other controls on the camera do not function.

Disconnecting the USB cable from your computer or removing the “Memory Stick” from your camera during USB connection

When the access lamp is lit up, it means that image data is being read or written. Never remove the “Memory Stick” or disconnect the USB cable at this time, as the data may be damaged.

For Windows 2000, Me, or XP users

1Double-click on the tasktray.

2Click (Sony DSC), then click [Stop].

3Confirm the device on the confirmation screen, then click [OK].

4Click [OK].

This step is unnecessary for Windows XP users.

5Disconnect the USB cable or remove the “Memory Stick.”

For Windows 98 or 98SE users

Do only step 5 above.

images Copying

69