4Copying images

“Image Transfer” launches and the images are automatically copied to the computer. When copying is complete, “ImageMixer” automatically launches and a list of images appears.

Normally “Image Transfer” and “Date” folders are created inside the “My Documents” folder, and all of the image files recorded with your camera are copied into these folders.

You can change the “Image Transfer” settings at the SETUP screen.

Copying images without using “Image Transfer”

If you do not set to launch “Image Transfer” automatically, you can copy images as following procedure.

aDouble-click [My Computer], then double-click [Removable Disk].

The contents of the “Memory Stick” inserted in your camera appear.

This section describes an example of copying images to the “My Documents” folder.

When the “Removable Disk” icon is not shown, see page 71.

When using Windows XP, see page 72.

bDouble-click [DCIM], then double-click [100MSDCF].

The “100MSDCF” folder opens.

The “100MSDCF” folder contains the still image files you shot using your camera.

The folder names vary depending on the type of images they contain (page 74).

70