Sharp AX-1100 Troubleshooting Chart, Question / Situation, Answer, START /+1min will not

TROUBLESHOOTING CHART

The following situations are normal and are not signs that the oven is malfunctioning.

QUESTION / SITUATION			ANSWER
Control panel /	The display is black / blank.	*	Open the door and close.
power supply		* Check the power plug is properly connected to a
			suitable wall outlet.
		* Check the wall socket and fuse are functioning
			properly.
		*	Disconnect the power cord, wait for a minute. Then
			reconnect, open and close the door.
	The display is fine but	*	Open the door and close. Is the oven light off? Press
	START /+1min will not		START /+1min again.
	function when pressed.	*	If the message "Err, HOT (fl ashing)" is displayed, wait
			until the message has disappeared.
	Electrical power supply is	The programmed cooking time and mode will be
	interrupted during cooking.	cancelled.
		Continue to cook with manual mode.
Energy save	The display does not change	In the following cases, Energy Save Mode
mode	to blank.	will be cancelled temporary:
		- When the door is opening.
		- Pause of the automatic cooking.
		- When the cooking fan is working after cooking.
		- Demonstration mode
		- Child lock
		- Extend mode
		- Drain mode
		- Descaling mode
		- Kitchen timer mode
		- When the display shows "Err, WATER (fl ashing)".
Water	Leakage water from the bottom	*	Check the drip tray is installed correctly. Remove and
	front of the oven.		replace the drip tray correctly.
			See page EN-7.
		*	Did you empty the drip tray before the cooking? You
			must empty the drip tray and replace it before Steam
			Cooking will start. See page EN-7.

EN – 22

AX1100_eng.indd 22

10.11.12 2:07:45 PM