INSTALLATION
1.Remove all packing materials from the inside of the oven cavity. Discard the loose polythene sheet from between the door and cavity. Remove the feature sticker, if attached, from the outside of the door.
2.Check the oven carefully for any signs of damage.
3.Place the oven on a flat, level surface strong enough to support the oven’s weight plus the heaviest item likely to be cooked.
This oven is designed for countertop use only. Steam is ventilated from the bottom of the oven. Make sure the escaping steam does not wet electrical outlets/other electrical appliances.
4.Place or mount the oven so that the bottom of the oven is 85 cm or more above the floor.
5.Do not allow the power supply cord to run over any hot or sharp surfaces, such as the hot air vent area at the bottom of the oven.
6.Ensure there is a minimum of free space above the oven of 12 cm.
7.Securely connect the plug of the oven to a standard earthed (grounded) household electrical outlet.
EN – 4
AX1100_eng.indd 4
10.11.12 2:07:35 PM
