3:Preparing the tuner and the remote

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

AC power cord

Inserting batteries into the remote

Insert two R6 (size-AA) batteries in the RM-S900D remote commander.

Observe the correct polarity when installing batteries.

To the wall outlet

Note

Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not use a new battery with old ones.

•Do not mix alkaline batteries and other kinds of batteries.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Tip

Under normal conditions, the batteries should last for about 3 months. When the remote no longer operates the tuner, replace all the batteries with new ones.

14GB