Using the controls on the tuner
1Press BAND repeatedly to select the FM or AM band.
2Press TUNING MODE repeatedly to select “AUTO T.”.
3Turn TUNING/SELECT.
In case of poor FM stereo reception
If the FM stereo reception is poor and “STEREO” flashes on the display, select monaural audio so that the sound will be less distorted.
Press FM MODE repeatedly to select FM MONO. The “FM MONO” appears and “MONO” indicator lights up on the display. To return to stereo mode, press FM MODE. The “FM AUTO” appears and “MONO” indicator do not lights up on the display.
Direct tuning
Be sure to use the buttons on the tuner for this operation.
TUNING/SELECT
POWER
3 2 1 4
1 Press BAND repeatedly to select the FM or AM band.
You can also use FM or AM on the remote.
2 Press DIRECT.
3 Press the numeric buttons to enter the frequency.
You can also use the numeric buttons on the remote.
Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0
4 Press ENTER.
You can also use ENTER on the remote. If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.
If you cannot tune in a station
Make sure you have entered the right frequency. If not, repeat steps 2 to 4. If you still cannot tune in a station, the frequency is not used in your area.
Broadcasts FM/AM Receiving
19GB