Receiving DAB Broadcasts
Before you can receive DAB stations(DAB INITIAL SCAN)
Before you can receive DAB stations, you must register the contents of broadcast (service components) so that they can be received by this tuner using the DAB INITIAL SCAN procedure.
Be sure to use the buttons on the tuner for this operation.
TUNING/SELECT
POWER
2 | 1 | 3 |
1 Press BAND repeatedly to select the DAB band.
2 Press DAB INIT SCAN.
“DAB SCAN” flashes on the display.
3 Press ENTER.
“SCAN ON” appears in the display and the tuner scans and stores all the DAB broadcasting contents and registers them in this tuner.
When done, “FINISH” appears in the display momentarily and the tuner returns to the normal operation.
Notes
• If you have not registered the contents of broadcast |
| |
(service components) in DAB band, “DAB TUNE” |
| |
appears in the display for a while, then |
| |
“DAB _ _ _ _” appears. “PLEASE RUN DAB |
| |
SCAN FOR DAB STATION” will then scroll |
| |
across the display. In this case, do the DAB | Receiving | |
except POWER. | ||
INITIAL SCAN procedure (page 15). |
| |
• Buttons on the tuner or supplied remote will not |
| |
function during DAB INITIAL SCAN procedure, |
| |
• If you move to another area, repeat this procedure | DAB | |
to store stations in your new area. | ||
| ||
• This procedure does not create any presets. | Broadcasts | |
• This procedure clears all previously stored presets. | ||
| ||
• For details on presets, see “Presetting DAB |
| |
stations” on page 16. |
|
Automatic tuning
>10ENTER
10/0
MEMORY
DAB1
FM AM
AUTO
TUNING
PRESET
2
1 Press DAB to select the DAB band.
The last received station is tuned in. When selecting DAB, “DAB TUNE” will appear in the display while the tuner is collecting DAB data. Please wait until this message disappears.
continued
15GB