Storing FM stations automatically

(AUTOBETICAL)

This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals.

If you want to store FM or AM stations one by one, see “Presetting radio stations” (page 21). Be sure to use the buttons on the tuner for this operation.

1

TUNING/SELECT

POWER

3

2

4

1 Press POWER to turn on the tuner.

2 Press BAND repeatedly to select the FM band.

3 Press AUTO-BETICAL SELECT.

“A. BETICAL” flashes on the display.

4 Press ENTER.

“AUTO-BETICAL SELECT” scrolls across the display and the tuner scans and stores all the FM and FM RDS stations in the broadcast area.

For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the ones with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2- character preset code. For more details on RDS, see page 23.

Regular FM stations are assigned 2- character preset codes and stored after the RDS stations.

20GB

Notes

•Buttons on the tuner or supplied remote will not function during autobetical operation, except

POWER.

•If you move to another area, repeat this procedure to store stations in your new area.

•For details on tuning the stored stations, see “Tuning to preset stations” (page 22).

•If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again.