Sony ST27A, ST27i Turning the device on and off, To insert a memory card, To turn on the device

To insert a memory card

1Remove the back cover from the phone.

2To remove the memory card slot cover, insert a fingernail into the gap between the memory card slot cover and the headset connector, then pull out the cover.

3Insert the memory card into the memory card slot with the gold-coloured contacts facing up.

4Using the edge of a SIM card or other similarly sized card, push the memory card further into the slot until you hear a locking sound.

5Push the memory card slot cover back into position so that it is fully latched. To attach the back cover

1Place the back cover over the back of the phone, then fit it into the slots.

2Slide the cover towards the bottom end of the phone. You hear a sound when the back cover locks into place.

Turning the device on and off

To turn on the device

Make sure that the battery is charged for at least 30 minutes before you turn on the device for the first time.

10

This is an Internet version of this publication. © Print only for private use.