Sony ST27A, ST27i manual To create a Smart Connect event, To edit a Smart Connect event

To create a Smart Connect event

1Start the Smart Connection application. If you are opening Smart Connect for the first time, tap OK to close the introduction screen.

2On the Events tab, tap .

3Give the event a name, then tap Create.

4Under When, add either an accessory or a time interval, or both.

5Under Do this, add what you want to happen in your device.

6Under At the end, add what you want to happen when you disconnect the accessory or when the time interval comes to an end. If both these conditions are set, the actions start either when you disconnect the accessory, or when the time interval comes to an end.

7To save the event, press .

To add a Bluetooth™ accessory, you have to first pair it with your device.

To edit a Smart Connect event

1Start the Smart Connection application.

2On the Events tab, tap an event.

3If the event is switched off, tap .

4Adjust the settings as desired.

5To save the event, press .

To delete an incorrect entry, touch and hold the entry and then tap Delete.

104

This is an Internet version of this publication. © Print only for private use.