Tuning to preset stations
1Rotate FUNCTION to switch the function to
TUNER.
The last received station is tuned in.
2Press PRESET TUNING + or – repeatedly to select the preset station you want.
Each time you press the button, you can select the preset station as follows:
nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N
nC0˜...C2˜C1N
Using the remote
1Press TUNER to switch the function to
TUNER.
2Press D.SKIP/CH/PRESET +/– repeatedly to select the preset station you want.
(Models of area code CEL, CEK only)
This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal. You can use the following convenient RDS features:
–Displaying RDS information
–Scanning preset stations by program type
Note that RDS is operable only for FM stations.*
*Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS services in your area, check with your local radio stations for details.
Receiving RDS broadcasts
Simply select a station on the FM band using direct tuning (page 26), automatic tuning (page 25), or preset tuning (page 27).
When you tune in a station that provides RDS services, the RDS indicator lights up and the program service name appears in the display.
Note
RDS may not work properly if the station you tuned to is not transmitting the RDS signal properly or if the signal strength is weak.
continued
Operation Amplifier/Tuner