The entered name is registered.
7 To create index names for other preset stations and functions, repeat steps 1 to 6.
Press ENTER.
6
The cursor flashes and you can select a character.
5 Create an index name by using the jog dial and cursor buttons ( or ). Turn the jog dial to select a character, then press the cursor button ( ) to move the cursor to the next position.
Tips
• You can select the character type as follows by turning the jog dial.
Alphabet (upper case) t Numbers t Symbols
• To enter a blank space, turn the jog dial until a blank space appears in the display.
• If you made a mistake, press the cursor button ( or ) until the character you want to change flashes, then turn the jog dial to select the correct character.
Press ENTER.
4
) to select
2 Press CUSTOMIZE.
3 Press the cursor button ( “NAME IN”.
To index a preset station Rotate FUNCTION to select TUNER, then tune in the preset station you want to create an index name for (page 27).
To index a function
Rotate FUNCTION to select a function you want to create an index name for.
1
Other Operations
Naming preset stations
and functions
You can enter a name of up to 8 characters for preset stations and functions and display it in the receiver’s display.
Using the Sleep Timer
You can set the receiver to turn off automatically at a specified time by using the remote.
For details, refer to the operating instructions supplied with the remote.
Press SLEEP on the remote repeatedly while the power is on.
Each time you select SLEEP, the display changes cyclically as follows:
2:00:00 t 1:30:00 t 1:00:00 t 0:30:00 t
OFF
While using Sleep Timer, “SLEEP” lights up in the display.
Tips
•For models of area code U, CA, you can also use the SLEEP button on the receiver.
•To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears in the display.
Operations Other