Getting Started

1: Check how to hookup your components

Steps 1a through 1c beginning on page 10 describe how to hook up your components to this receiver. Before you begin, refer to “Connectable components” below for the pages which describe how to connect each component.

After hooking up all your components, proceed to “2: Connecting the antennas” (page 17).

Connectable components

Component to be connected

Page

DVD/LD player

 

 

 

 

 

With digital audio output*1

10–11

 

With multi-channel audio output*2

13–14

 

With analog audio output only*3

10–11

TV monitor

 

 

 

 

 

With component video input*4 *5

11 or 14

 

With S-Video or composite video input only

16

 

 

Satellite tuner

 

 

 

 

 

With digital audio output*1

10–11

 

With analog audio output only*3

10–11

CD/Super Audio CD player

 

 

 

 

 

With digital audio output*1

12

 

With multi-channel audio output*2

13

 

With analog audio output only*3

15

MD/Tape deck

 

 

 

 

 

With digital audio output*1

12

 

With analog audio output only*3

15

Analog disc turntable

15

 

 

Multi-channel decoder

13

 

 

VCR, video camera, video game, etc.

16

 

 

 

*1 Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUT connector, etc.

*2 Model with a MULTI CH OUTPUT connectors, etc. This connection is used to output the audio decoded by the component’s internal multi-channel decoder through this receiver.

*3 Model equipped only with AUDIO OUT L/R jacks, etc. *4 Model with component video (Y, B-Y, R-Y) input jacks *5 Except for models of area code CEL, CEK.

8GB