xDISTANCE (Distance unit)

Lets you select the unit of measure for setting distances.

•feet (default for models for area code U, CA) The distance is displayed in feet. “ft.” indicator lights up.

•meter (default for models for other area codes) The distance is displayed in meters.“m” indicator lights up.

xSURROUND PL. (SLSR) (Surround speaker position)*

Lets you specify the location of your surround speakers for proper implementation of the surround effects in the Cinema Studio EX modes (page 34).

 

90°

 

A

60°

A

B

30°

B

C

C

 

 

20°

 

•SIDE

Select if the location of your surround speakers corresponds to section A.

•MID

Select if the location of your surround speakers corresponds to section B.

•BEHD.

Select if the location of your surround speakers corresponds to section C.

Tip

“SURROUND PL.” (Surround speaker position) is designed specifically for implementation of the sound fields of the Cinema Studio EX modes.

For other sound fields, speaker position is not so critical. Those sound fields were designed under the premise that the surround speakers would be located behind the listening position, but presentation remains fairly consistent even with the surround speakers positioned at a rather wide angle. However, if the speakers are pointing toward the listener from the immediate left and right of the listening position, the surround effects becomes unclear unless set to “SIDE”.

Nevertheless, each listening environment has many variables, like wall reflections, and you may obtain better results using “BEHD.” or “MID” if your speakers are located high above the listening position, even if they are to the immediate left and right. Therefore, although it may result in a setting contrary to the above explanation, we recommend that you playback multi channel surround encoded software and select the setting that provides a good sense of spaciousness and that best succeeds in forming a cohesive space between the surround sound from the surround speakers and the sound of the front speakers. If you are not sure which sounds best, select “BEHD.” and then use the speaker distance parameter and speaker level adjustments to obtain proper balance.

continued

Adjustments Advanced Settings and

43GB