AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only)
With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than
0.05% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode (8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %) 80 W + 80 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %) FRONT1):100 W + 100 W CENTER1): 100 W SURR1): 100 W + 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT:1) 80 W + 80 W
CENTER1): 80 W
SURR1): 80 W + 80 W
Models of other area codes
Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W2)
90 W + 90 W3)
(4 ohms 1 kHz, THD 0.7 %)
90 W + 90 W2)
80 W + 80 W3)
Reference Power Output2) (8 ohms 1 kHz, THD 0.7 %)
FRONT1): 100 W + 100 W
CENTER1): 100 W
SURR1): 100 W + 100 W
(4 ohms 1 kHz, THD 0.7 %)
FRONT1): 80 W + 80 W
CENTER1): 80 W
SURR1): 80 W + 80 W
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT1): 90 W + 90 W
CENTER1): 90 W
SURR1): 90 W + 90 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT1): 75 W + 75 W
CENTER1): 75 W
SURR1): 75 W + 75 W
1)Depending on the sound field settings and the source, there may be no sound output.
2)Measured under the following conditions:
| Area code | Power requirements |
| SP, CEL, CEK | 230 V AC, 50 Hz |
|
|
|
| TW | 110 V AC, 60 Hz |
|
| |
3) Measured under the following conditions: | ||
|
|
|
| Area code | Power requirements |
|
|
|
| CN, KR | 220 V AC, 50 Hz |
|
|
|
Frequency response |
| |
PHONO | RIAA equalization curve | |
|
| ±0.5 dB |
|
| |
CD/SACD, MD/ | 10 Hz – 100 kHz | |
TAPE, TV/SAT, | ||
DVD/LD, VIDEO 1, 2, | field and equalizer | |
3 |
| bypassed) |
|
| |
Inputs (Analog) |
| |
PHONO | Sensitivity: 2.5 mV | |
|
| Impedance: 50 kilohms |
|
| S/N4): 86 dB (A, 2.5 mV5)) |
MULTI CH IN, CD/ | Sensitivity: 150 mV | |
SACD, MD/TAPE, | Impedance: 50 kilohms | |
DVD/LD, TV/SAT, | S/N4): 100 dB | |
VIDEO 1, 2, 3 | (A, 150 mV5)) |
4)INPUT SHORT.
5)Weighted network, input level.
Inputs (Digital)
ASSIGNABLE | Impedance: 75 ohms |
COAXIAL IN (DVD/ | S/N: 100 dB |
LD CD/SACD) | (A, 20 kHz LPF) |
|
|
DVD/LD, TV/SAT, | S/N: 100 dB |
MD/TAPE (Optical) | (A, 20 kHz LPF) |
|
|