4:Connecting the AC power cord

Connect the AC power cord to a wall outlet.

A

L

SUB

WOOFER

 

AUDIO

OUT

BL

SPEAKERS

AC power

b

 

cord

To a wall outlet

 

Performing initial setup operations

Before using the receiver for the first time, initialize the receiver by performing the following procedure.

This procedure can also be used to return settings you have made to their factory defaults.

1 Press ?/1 on the receiver to turn off the receiver.2 Hold down ?/1 on the receiver for 5 seconds.

3 While “ENTER to Clear” appears in the display, press MEMORY/ENTER on the receiver.

After “MEMORY CLEARING” appears in the display for a while, “MEMORY CLEARED!” appears.

The following are reset to their factory settings.

All settings in the SP. SET UP, LEVEL, EQUALIZER, CUSTOMIZE, TUNER and CIS (models of area code U, CA only) menus.

The sound field memorized for each input and preset station.

All preset stations.

All index names for inputs and preset stations.

Note

If “2nd zone on” appears in the display, the initial setup operation cannot be performed. Turn off the indication by following the first tip of “Listening to the sound in another zone” (page 48).

Started Getting

19GB