xSB DEC(Surround back decoding mode)

You can use the CUSTOMIZE menu to set the surround back decoding mode. See page 35.

OFF

AUTO

MATRIX

Note

This parameter is valid only in the A.F.D. mode (page 32).

xDC LINEAR (Phase Linearlizing)

Lets you change the phase polarity of low frequency signals and enhance the bass.

OFF

The bass is not enhanced.

STD

MID

HI

The bandwidth range of the phase correction increases in the order of “STD”, “MID”, “HI”.

xSF LINK (Sound field link)

ON

Lets you apply the last selected sound field to an input whenever it is selected. For example, if you select HALL for the CD/SACD input, then change to a different input and return to CD/SACD, HALL will automatically be applied again.

OFF

Sound field link is not activated.

xDEC. PRI.(Digital audio input decoding priority)

Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. The initial setting is “PCM” for DVD and MD/DAT, and “AUTO” for other inputs.

AUTO

Automatically switches the input mode between DTS, Dolby Digital, or PCM.

PCM

PCM signals are given priority (to prevent the interruption when playback starts). Even when other signals are input, the sound is output. However, this receiver cannot decode DTS-CD when set to “DEC. PCM”. When set to “AUTO” and the sound from the digital audio jacks (for MD/DAT, etc.) is interrupted when playback starts, set to “PCM”.

xOSD COLOR(OSD color system)(Models of area code CEL, SP only)

Lets you select the color system.

NTSC

PAL

xOSD H.POSI(OSD horizontal position)

Initial setting: 4

Lets you adjust the position of the on-screen display horizontally. You can adjust from 0 to 64.

x OSD V.POSI
(OSD vertical position)

 

Initial setting: 4

 

Advanced

(Digital audio input assignment)

Lets you adjust the position of the on-screen display

 

vertically. You can adjust from 0 to 32.

 

x DIGITAL ASSIGN ?

Adjustments

Lets you adjust the brightness of the display in 3 steps.

Lets you assign the digital audio input to other input.

 

For details, see “Assigning the audio input” on

 

page 37.

 

x DIMMER (Brightness of the display)

 

0 %

and

 

• 40 %

Settings

(Naming inputs)

• 70 %

 

x NAME?

 

Lets you set the name of inputs selected with INPUT

 

SELECTOR. For details, see “Naming preset stations

 

and inputs” on page 45.

 

Advanced SP. SET UP menu parameters

When “MENU EXP.” is set to “ON”, all of the following parameters are displayed and adjustable.

See page 20 for the SP. SET UP menu adjustments. Initial settings are underlined.

continued

41GB