About the indications in the display

1 2

 

3

 

4

5

6

7

8

9

q;

SLEEP SP.A SP.B

 

;DIGITAL EX ;PRO LOGIC II

DTS -ES 96/24 MONO MEMORY

SW

L

C

R

MULTI CH IN 1 2

D.RANGE EQ NEO:6

 

RDS

STEREO

L.F.E.

SL

S

SR

 

 

 

 

 

 

OPT

 

 

 

 

 

 

COAX

 

SBL

SB

SBR

 

 

 

 

 

 

 

 

 

 

 

 

 

D.ASSIGN

 

 

 

 

 

 

 

 

 

 

qk qj

ASW: Lights up when sub woofer selection is set to “YES” (page 20). While this indicator lights up, the receiver outputs the LFE signal recorded on the disc or generates a low frequency signal for output to the sub woofer. This indicator does not light during the 2CH STEREO mode.

BSLEEP: Lights up when sleep timer is activated.

CSPA/SPB: Lights up in accordance with the speaker system being used (A or B). Turns off when headphones are connected.

DMULTI CH IN 1/2: Lights up when “MULTI 1 DIRECT” or “MULTI 2 DIRECT” is selected.

E; DIGITAL (EX): Lights up when Dolby Digital signals are input. “EX” lights up when Dolby Digital EX signals are input.When playing a Dolby Digital EX format disc, be sure that you have made digital connections and that INPUT MODE is NOT set to “ANALOG FIXED” (page 38).

F; PRO LOGIC (II): Lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. This indicator also lights when the Pro Logic II Movie/Music decoder is activated. However, this indicator does not light if both the center and surround speakers are set to “NO”.

GDTS (-ES):Lights up when DTS signals are input. “-ES” lights up when DTS-ES signals are input. When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is NOT set to “ANALOG FIXED” (page 38).

qh qg qf

qdqs qa

H96/24: Lights up when the receiver is decoding DTS 96 kHz/24 bit signals.

ITuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages 25–28 for tuner operations.

JMEMORY: Lights up when presetting stations, naming preset stations and inputs, etc.

KD.ASSIGN: Lights up when the digital assign function is used for the selected input.

LCOAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal or when INPUT MODE is set to “COAXIAL FIXED” (page 38).

MOPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal, or when INPUT MODE is set to “OPTICAL FIXED” (page 38).

NNEO:6: Lights up when DTS Neo:6 Cinema/ Music decoding is activated. However, this indicator does not light if both the center and surround speakers are set to “NO”.

OEQ: Lights up when the equalizer is activated.

PD.RANGE: Lights up when dynamic range compression is activated (page 43).

QPlayback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings). L (Front Left), R (Front Right), C (Center (monaural)), SL (Surround Left), SR (Surround Right), S (Surround (monaural or the surround components obtained by Pro Logic processing)), SBL (Surround back Left), SBR (Surround back right), SB

30GB