Manuals / Brands / Home Audio / Stereo Receiver / Sony / Home Audio / Stereo Receiver

Sony STR-DA2100ES Presetting radio stations, 25US, Amplifier, Direct tuning, FM or AM band, Press D.TUNING, Press MEMORY/ENTER, Presetting radio stations

1 68

Download 68 pages, 2.29 Mb

Press D.TUNING.

Direct tuning

You can enter the frequency of the station you want directly. Use the remote for the operation.

1 Move the easy scroll key (PUSH) to select TUNER.2 Press PUSH repeatedly to select the FM or AM band.

3

4 Press the numeric buttons to enter the frequency.

Example 1: FM 102.50 MHz Press 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Press 1 b 3 b 5 b 0

(You do not have to enter the last “0” when the tuning scale is set to 10 kHz.)

If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.

If you cannot tune in a station and the entered numbers flash

Make sure you have entered the right frequency. If not, repeat steps 3 and 4. If the entered numbers still flash, the frequency is not used in your area.

Presetting radio stations

	You can preset up to 30 FM or AM stations.

	Then you can easily tune in the stations you
	often listen to.			Amplifier

	Presetting radio stations
				Operation
	1	Turn INPUT SELECTOR to select the

		FM or AM band.
		The last received station is tuned in.
	2 Tune in the station that you want to
		preset using Automatic Tuning
	3	(page 24) or Direct Tuning (page 25).
		Press MEMORY/ENTER.
		“MEMORY” appears in the display for a
		few seconds. Do steps 4 to 5 before the
		display goes out.

4 Press PRESET TUNING + or PRESET TUNING – repeatedly to select a preset station number.

Each time you press the button, you can select the preset station number as follows:

tA1yA2y...yA0yB1yB2y...yB0T

tC0y...yC2yC1T

If “MEMORY” goes out before you select the preset station number, start again from step 3.

Tip

You can also use the remote to select a preset station number. Press SHIFT repeatedly to select a memory page (A, B or C) and then press the numeric button to select a preset number.

5 Press MEMORY/ENTER again.

The station is stored to the selected preset number.

If “MEMORY” goes out before you press MEMORY, start again from step 3.

6 Repeat steps 2 to 5 to preset another station.

continued

25US

Contents

Page WARNING About This Manual Table of Contents 1: Check how to hookup your components Required cords A Audio cord F Coaxial digital cord G Monaural audio cord B Audio/video cord 1a: Connecting components with digital audio output jacks 2 Connect the video jacks Hooking up an MD/Tape deck or a Super Audio CD/CD player 1b: Connecting components with multi channel output jacks 11US 1c: Connecting components with only analog audio jacks Hooking up video components 13US 2: Connecting the antennas 3: Connecting speakers Required cords A Speaker cords (not supplied) B Monaural audio cord (not supplied) SPEAKERS FRONT B 4:Connecting the AC power cord 5: Setting up the speakers xSUB WOOFER XXX (Sub woofer selection) xFRONT SP XXXXX (Front speakers size) xCTR SP XXXXX (Center speaker size) xSURR SP XXXXX (Surround speakers size) xSB SP xFRONT DIST. XX ft. (Front speaker distance) xCTR DIST. XX ft (Center speaker distance) xSURR DIST. XX ft. (Surround speaker distance) xSB DIST. XX ft 6:Adjusting the speaker levels and balance —TEST TONE To output the test tone only from a specific speaker For more precise adjustment 22US Selecting the component Listening to multi channel sound — MULTI CH IN Listening to FM/AM radio Presetting radio stations Changing the display About the indications in the display PRO LOGIC IIx: A.DIRECT: SLEEP: Playback channel indicators: L C R Using only the front speakers Enjoying higher fidelity sound — AUTO FORMAT DIRECT Selecting a sound field xCINEMA ST. EX B (CINEMA STUDIO EX B) DCS xCINEMA ST. EX C (CINEMA STUDIO EX C) DCS xV. MULTI DIMENSION DCS — SURR BACK DECODING How to select the surround back decoding mode When you select “SB DEC AUTO” When you select “SB DEC ON” When you select “SB DEC OFF” 34US Assigning the audio input — DIGITAL ASSIGN Assigning the component video input —COMPONENT VIDEO INPUT ASSIGN Switching the audio input mode for digital components — INPUT MODE Customizing sound fields Adjusting the equalizer Advanced settings xDUAL MONO (Digital broadcast language selection) xOSD H.POSI (OSD horizontal position) xOSD V.POSI xPOSI XXXX/XXXX (Surround speaker position) xCROSS. XXX Hz (Speaker crossover frequency) Settings and Adjustments Advanced Advanced LEVEL menu parameters All LEVEL menu parameters xPHASE NOISE (Phase noise) xPHASE AUDIO (Phase audio) x D.RANGECOMP. XXX (Dynamic range compressor) Custom install mode Naming preset stations and inputs Using the Sleep Timer Selecting the speaker system Recording Insert a blank video tape into the VCR (VIDEO 1 or VIDEO 2) for recording Select the program source to be recorded Prepare the component for playing Listening to the sound in another zone Using the 2ND ZONE jacks 2ND ZONE 1 Press MAIN MENU repeatedly to select “<< CIS >>” 2 Turn MENU until “ZONE-2XXXXXX” appears Hold down RM SET UP and press 3 Turn –/+to select the 2nd zone audio source you want 2nd zone connections STR-DA2100ES 2ND Before you use your remote Remote button description 50US the 51US 52US Selecting the input, macro list and command mode of the remote 53US Selecting the command mode of the remote Programming the remote To cancel programming To activate the input after programming If programming is unsuccessful, check the following: To clear the memory of the remote The numeric codes corresponding to the component and the maker of the component To control a tape deck To control an LD player To control a video CD player To control a VCR To control a DVD player Learning the commands of your components To activate the input source after programming To cancel learning To clear the learned codes To use a command that has been learned 58US Performing several commands in sequence automatically (Macro Play) Precautions Troubleshooting There is no sound from the sub woofer The surround effect cannot be obtained Dolby Digital or DTS multi channel sound is not reproduced Recording cannot be done The FM reception is poor Remote control The remote does not function Error messages PROTECTOR If you are unable to remedy the problem using the troubleshooting guide Specifications FM tuner section AM tuner section Video section General Supplied accessories List of button locations and reference pages Index