Lets you select the source signals (analog audio signals) you want to output in the 2nd zone (audio inputs except PHONO). When you select “SOURCE”, the signals of the current input is output.
Tips
• Only signals from components connected to the analog input jacks are output through the 2ND ZONE jacks. No signal is output from components connected to only the digital input jacks.
• When “SOURCE” is selected, the signals input to the MULTI CH IN jacks are not output from the 2ND ZONE jacks even when MULTI CH IN function is used. The 2 channel analog audio signals of the current input is output.
x INST. MODE (RS232C control)
• ON
The receiver can receive commands from the RS232C port even when the power is off (standby mode).
• OFF
The receiver does not receive commands from the RS232C port when the power is off (standby mode).
ZONE-2 (2nd zone source)
x
3 Turn –/+ to select the setting you want.
4 Repeat steps 2 and 3 to adjust the other items.
CIS menu parameters Initial settings are underlined.
Turn MENU to select the parameter.
2
Custom install mode
This receiver features the custom install modes described below. Depending on how you intend to use these features, use of these modes may require additional equipment (available separately) or modification of your listening environment. Please consult the retailer where you purchased this receiver for more information.
1 Press MAIN MENU to select
“ CIS ”.
x12V TRIG (12 V trigger)

Lets you turn on or off the external equipment by outputting 12V trigger when the receiver is turned on or off. For example, you can automatically unroll your video screen when you turn on the receiver.

•OFF

Lets you turn off output of 12V triggers even when the main receiver is turned on.

•CTRL

Lets you turn on or off the output of 12V triggers manually by the CIS command of the IR remote or RS232C control.

•ZONE

Lets you turn on output of 12V triggers when the main receiver is turned on.

•INPUT

Lets you turn on output of 12V triggers when the main receiver is turned on, depending on the setting of each input. See “To set the 12V trigger setting for each input”.

To set the 12V trigger setting for each input

The initial setting is “ON” for VIDEO 1, VIDEO 2, VIDEO 3, DVD, and TV/SAT, and “OFF” for other inputs. To set this setting, you can use only the controls on the front panel.

1Select “INPUT” in “12V TRIG”.

2Press MEMORY/ENTER.

3Turn MENU to select the input.

4Turn –/+ to select “ON” to activate 12V trigger or select “OFF” to disactivate.

5Press MEMORY/ENTER.

Settings and Adjustments Advanced

43US