Tuning range | 87.5 - 108.0 MHz |
Antenna | FM wire antenna |
Antenna terminals | 75 ohms, unbalanced |
Intermediate frequency | 10.7 MHz |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 ohms |
Useable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |
Tuning range
With
With | 531 – 1,710 kHz5) |
Antenna | Loop antenna |
Intermediate frequency | 450 kHz |
Usable sensitivity | 50 dB/m (at 1,000 kHz or |
| 999 kHz) |
S/N | 54 dB (at 50 mV/m) |
Harmonic distortion | 0.5% (50 mV/m, 400 Hz) |
Selectivity |
|
At 9 kHz: | 35 dB |
At 10 kHz: | 40 dB |
5)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down PRESET TUNING + or TUNING +, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video sectionInputs/Outputs |
|
Video: | 1 |
Y: 1 |
C: 0.286
COMPONENT VIDEO: Y: 1
80 MHz HD Pass Through
Power requirements | 120 V AC, 60 Hz |
Power consumption |
|
|
|
Area code | Power consumption |
|
|
U | 310 W |
|
|
CA | 420 VA |
| |
Power consumption (during standby mode) | |
| 0.5 W (when “INST. |
| MODE” in the CIS menu is |
| set to “OFF”) (page 43) |
AC outlets | 2 switched, 120 W/1A |
| MAX |
Dimensions (w/h/d) (Approx.) | |
| 430 × 160.5 × 398.5 mm |
| (16 7/8 × 6 2/8 × 15 5/8 |
| inches) including |
| projecting parts and |
| controls |
Mass (Approx.) | 14.0 kg (30 lb 14 oz) |
FM wire antenna (1)
AM loop antenna (1)
AC power cord (1)
Remote commander
R6
For details on the area code of the component you are using, see page 3.
Design and specifications are subject to change without notice.
Information Additional