Hold down RM SET UP and press ?/1.
3 Turn –/+ to select the 2nd zone audio source you want.

Each time you turn the button, the audio source changes cyclically as follows:

SOURCE*1 t MD/TAPE t SA-CD/ CD t TUNER*2

*1 The audio signals of the current input is output. *2 The audio signals of the last selected TUNER

function (AM/FM) is output.

4 Turn on the stereo amplifier in another room or zone, then adjust the volume level with the VOLUME control.

Tips

•Even when this receiver is turned off, the receiver in the 2nd zone remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the remote at the same time (SYSTEM STANDBY).

•Only signals from components connected to the analog input jacks are output through the 2ND ZONE OUT jacks. No signals are output from components connected to only the digital input jacks.

•When “SOURCE” is selected, the signals input to the MULTI CH IN jacks are not output from the 2ND ZONE OUT jacks even when MULTI CH IN is selected. The analog audio signals of the current input are output.

2nd zone connections

Main receiver

Audio/video components

STR-DA2100ES2NDZONE OUT

2nd zone

SpeakerSpeaker

Amplifier/Receiver

Using the surround back speakers for the 2nd zone

Make sure that the surround back speakers selection parameter is set to “ZONE-2” (page 19).

Use the remote for the following operation.

1

2 Move the Easy scroll key (PUSH) to select “2ND”.3 Press PUSH.

“2ND” appears in the remote display.

4 Move the Easy scroll key (PUSH) to select the analog signals you want to output (e.g. TUNER).

5 Press PUSH.

Your selection (e.g. ZONE-2 TUNER) apppears in the display.

6 Press MASTER VOL +/– to adjust the volume of your speakers in the 2nd zone.

Tips

•Press ?/1 on the remote while “2ND” appears in the remote display to turn off 2nd zone.

•To turn off the receiver, make sure that you select “MAIN” in step 2 above. “2ND” disappears from the remote display. Then, press ?/1 to turn off the receiver.

•You can use MUTING on the remote to mute the sound.

48US