Specifications
AUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(Models of area code U only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 110 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.
Amplifier sectionPower output
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
110 W + 110 W1)
(8 ohms 1 kHz, THD 0.7%)
120 W + 120 W1)
(8 ohms 1 kHz, THD 10%)
150 W + 150 W1)
Reference Power Output1)
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
FRONT2): | 110 W/ch |
CENTER2): | 110 W |
SURR2): | 110 W/ch |
SURR BACK2): | 110 W/ch |
(8 ohms 1 kHz, THD 0.7%) | |
FRONT2): | 120 W/ch |
CENTER2): | 120 W |
SURR2): | 120 W/ch |
SURR BACK2): | 120 W/ch |
(8 ohms 1 kHz, THD 10%) |
|
FRONT2): | 150 W/ch |
CENTER2): | 150 W |
SURR2): | 150 W/ch |
SURR BACK2): | 150 W/ch |
1)Measured under the following conditions:
120 V AC, 60 Hz
2)Depending on the sound field settings and the source, there may be no sound output.
Frequency response
PHONO | RIAA equalization curve |
| ±0.5 dB |
|
|
MULTI CH IN, | 10 Hz – 100 kHz |
MD/TAPE, DVD, | field and equalizer |
VIDEO 1, 2, 3 | bypassed) |
|
|
Inputs (Analog) |
|
|
|
PHONO | Sensitivity: 8 mV |
| Impedance: 50 kiloohms |
| S/N3): 86 dB |
| (A, 8 mV4)) |
MULTI CH IN, | Sensitivity: 500 mV |
Impedance: 50 kiloohms | |
MD/TAPE, DVD, | S/N3): 96 dB |
VIDEO 1, 2, 3 | (A, 500 mV4)) |
3)INPUT SHORT (with sound field and equalizer bypassed).
4)Weighted network, input level.
Inputs (Digital)
DVD, | Sensitivity: – |
(Coaxial) | Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
TV/SAT, | Sensitivity: – |
MD/TAPE, VIDEO 3 | Impedance: – |
(Optical) | S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
Outputs (Analog) |
|
|
|
MD/TAPE (OUT), | Voltage: 500 mV |
VIDEO 1, 2 | Impedance: 10 kiloohms |
(AUDIO OUT) |
|
|
|
SUB WOOFER | Voltage: 2 V |
| Impedance: 1 kiloohms |
|
|
Outputs (Digital) |
|
|
|
MD/TAPE (Optical) | Sensitivity: – |
|
|
Equalizer |
|
|
|
Gain levels | ±10 dB, 0.5 dB step |
|
|