(Models of area code CEL, CEK only)
This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal. You can use the following convenient RDS features:
–Displaying RDS information
–Scanning preset stations by program type
Note that RDS is operable only for FM stations.*
*Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS services in your area, check with your local radio stations for details.
Receiving RDS broadcasts
Simply select a station on the FM band using direct tuning (page 26), automatic tuning (page 25), or preset tuning (page 28).
When you tune in a station that provides RDS services, the RDS indicator lights up and the program service name appears in the display.
Note
RDS may not work properly if the station you tuned to is not transmitting the RDS signal properly or if the signal strength is weak.
Displaying RDS information
While receiving an RDS station, press
DISPLAY.
Each time you press the button, RDS information on the display changes cyclically as follows:
PS (Program Service name)a) t Frequencya) t PTY (Program TYpe) indicationb) t RT (Radio Text) indicationc) t CT (Current Time) indication (in
a)This information also appears for
b)Type of program being broadcast (see page 30).
c)Text messages sent by the RDS station.
Notes
•If there is an emergency announcement by government authorities,
•If a station does not provide a particular RDS service, “No XX” (such as “No Clock Time”) appears in the display.
•When a station broadcasts radio text data, it is displayed at the same rate at which it is sent from the station. Any change in this rate is reflected in the display rate of the data.
Scanning preset stations by program type
You can tune in preset stations according to a program type that you specify. The receiver scans for stations in its preset memory currently broadcasting the specified program type.
1 Press RDS PTY.
2 Press TUNING/PTY SELECT + or TUNING/PTY SELECT – to select the program type.
See the table on the next page for the information on each program type.
3 Press RDS PTY.
While the receiver is scanning stations, “PTY SEARCH” appears in the display window.
When the receiver finds a station, the receiver stops scanning. When the receiver could not find any preset stations currently broadcasting the specified program type, “PTY not found” appears in the display.
continued
Operation Amplifier/Tuner