AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only)
With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than
0.09% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode (8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %) 80 W + 80 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %) FRONT1):100 W + 100 W CENTER1): 100 W SURR1): 100 W + 100 W SURR BACK1): 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT:1) 80 W + 80 W
CENTER1): 80 W
SURR1): 80 W + 80 W
SURR BACK1): 80 W
Models of other area code
Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W2)
(4 ohms 1 kHz, THD 0.7 %)
90 W + 90 W2)
Reference Power Output2) (8 ohms 1 kHz, THD 0.7 %)
FRONT1): 100 W + 100 W
CENTER1): 100 W
SURR1): 100 W + 100 W
SURR BACK1): 100 W
(4 ohms 1 kHz, THD 0.7 %)
FRONT1): 90 W + 90 W
CENTER1): 90 W
SURR1): 90 W + 90 W
SURR BACK1): 90 W
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT1): 90 W + 90 W
CENTER1): 90 W
SURR1): 90 W + 90 W
SURR BACK1): 90 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT1): 80 W + 80 W
CENTER1): 80 W
SURR1): 80 W + 80 W
SURR BACK1): 80 W
1)Depending on the sound field settings and the source, there may be no sound output.
2)Measured under the following conditions:
Area code | Power requirements |
E | 240 V AC, 50 Hz |
|
|
SP, CEL, CEK, KR | 230 V AC, 50 Hz |
|
|
continued
Information Additional