Adjusting the equalizer (continued)
EQ menu parameters
xFRONT BASS XXX.X dB (Front speaker bass level)
xFRONT MID XXX.X dB (Front speaker midrange level)
xFRONT TREBLE XXX.X dB (Front speaker treble level)
xCENTER BASS XXX.X dB (Center speaker bass level)
xCENTER MID XXX.X dB (Center speaker midrange level)
xCENTER TREBLE XXX.X dB (Center speaker treble level)
xSURROUND BASS XXX.X dB (Surround speaker bass level)
xSURROUND TRE. XXX.X dB (Surround speaker treble level)
xSUR.BACK BASS XXX.X dB (Surround back speaker bass level)
xSUR.BACK TRE. XXX.X dB (Surround back speaker treble level)
Initial setting: 0 dB
You can adjust from
To apply equalization
Press EQUALIZER. Each press turns the equalizer on or off. The EQ indicator lights when the equalizer is on.
For advanced EQ menu adjustments
Use the CUSTOMIZE menu and set “MENU EXPAND” to “ON” to enable advanced adjustments.
For details on “MENU EXPAND”, see page 46.
For details on how to set the items, see page 55.
Using the CUSTOMIZE menu to adjust the receiver
You can adjust various receiver settings using the CUSTOMIZE menu.
1 Press CUSTOMIZE.
The CUSTOMIZE menu appears in the display.
2 Press the cursor buttons ( or ) to select the parameter.
For details, see “CUSTOMIZE menu parameters” below.
3 Turn the jog dial to adjust the selected parameter.
4 Repeat steps 2 and 3 to adjust the other items.
CUSTOMIZE menu parameters
The initial setting is underlined.
xMENU EXPAND (Menu expanding)
• ON
The advanced parameters for the SET UP, SURROUND, LEVEL, and EQ menus are displayed and can be adjusted.
For details on each setup items, see pages 21,
• OFF
The advanced parameters are not displayed.
xdts 96/24DEC.
(DTS 96/24 decoding mode)
•AUTO
When a DTS 96/24 signal is input, it is played back at 96 kHz sampling frequencies.
•OFF
Even when a DTS 96/24 signal is input, it is played back at 48 kHz sampling frequencies.
Note
This parameter is valid only in the AUTO DECODING mode (page 34). In other sound fields, this parameter is always set to “OFF”.