Other Operations

Naming preset stationsand functions

You can enter a name of up to 8 characters for preset stations and functions and display it in the receiver’s display.

1 To index a preset station

Rotate FUNCTION to select TUNER, then tune in the preset station you want to create an index name for (page 28).

To index a function

Rotate FUNCTION to select a function you want to create an index name for.

2 Press CUSTOMIZE.

The CUSTOMIZE menu appears in the display.

3 Press the cursor button ( ) to select “NAME IN?”.

The preset station name or the function name flashes.

4 Press ENTER.

The cursor flashes and you can select a character.

5 Create an index name by using the jog dial and cursor buttons ( or ).

Turn the jog dial to select a character, then press the cursor button ( ) to move the cursor to the next position.

Tips

You can select the character type as follows by turning the jog dial.

Alphabet (upper case) tAlphabet (lower case) tNumbers tSymbols

To enter a blank space, turn the jog dial until a blank space appears in the display.

If you made a mistake, press the cursor button

( or ) until the character you want to change flashes, then turn the jog dial to select the correct character.

6 Press ENTER.

The entered name is registered.

7 To create index names for other preset stations and functions, repeat steps 1 to 6.

Note

(Models of area code CEL, CEK only)

When you name an RDS station and tune in the station, the Program Service (PS) name appears instead of the name you entered. (You cannot change the name of a Program Service (PS) name. The name you entered will be overwritten by the Program Service (PS) name.)

56GB