Specifications (continued)
Frequency response
PHONO | RIAA equalization curve |
| ±0.5 dB |
|
|
CD/SACD, TAPE, | 10 Hz – 100 kHz |
MD/DAT, TV/SAT, | |
DVD/LD, VIDEO 1, 2, | ANALOG DIRECT is |
3 | selected) |
|
|
Inputs (Analog) |
|
PHONO | Sensitivity: 2.5 mV |
| Impedance: 50 kilohms |
| S/N3): 86 dB (A, 2.5 mV4)) |
MULTI CH IN 1, 2, | Sensitivity: 150 mV |
CD/SACD, TAPE, | Impedance: 50 kilohms |
MD/DAT, DVD/LD, | S/N3): 96 dB |
TV/SAT, VIDEO 1, 2, | (A, 150 mV4)) |
3 |
|
|
|
3)INPUT SHORT.
4)Weighted network, input level.
Inputs (Digital)
DVD/LD (Coaxial) | Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
DVD/LD, TV/SAT, | S/N: 100 dB |
MD/DAT, VIDEO3 | (A, 20 kHz LPF) |
(Optical) |
|
|
|
Outputs |
|
TAPE, MD/DAT | Voltage: 150 mV |
(REC OUT), VIDEO | Impedance: 2.2 kilohms |
1, 2 (AUDIO OUT) |
|
|
|
FRONT L/R, | Voltage: 2 V |
CENTER, | Impedance: 1 kilohms |
SURROUND L/R, |
|
SURROUND BACK, |
|
SUB WOOFER |
|
|
|
EQ |
|
BASS: | 99 Hz~1.0 kHz |
MID (FRONT L/R, CENTER only): | |
| 198 Hz~10 kHz |
TREBLE: | 1.0 kHz~10 kHz |
Gain levels: | ±10 dB, 0.5 dB step |
FM tuner section
Tuning range | 87.5 - 108.0 MHz |
Antenna terminals | 75 ohms, unbalanced |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 ohms |
Usable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |
AM tuner section
Tuning range
Models of area code U, CA
With
With
Models of area code E
With
With
Models of area code SP, CEL, CEK, KR With
Antenna | Loop antenna |
Usable sensitivity | 50 dB/m (at 1,000 kHz or |
| 999 kHz) |
S/N | 54 dB (at 50 mV/m) |
Harmonic distortion | 0.5 % (50 mV/m, |
| 400 Hz) |
Selectivity |
|
At 9 kHz: | 35 dB |
At 10 kHz: | 40 dB |
5)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down TUNING + and press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.