Performing Initial Setup Operations
Up Hooking
Setting and the Up System Speaker
Once you have made speaker connections and have turned on the power for the first time, clear the receiver’s memory. After you have done this, set the speaker sizes, speaker locations and other initial system settings that are necessary.
Clearing the receiver’s memory
Before you use your receiver for the first time or when you want to clear the receiver’s memory, do the following. If the Demonstration appears when the power is turned on, this procedure is not necessary.
1/u
? / 1 |
|
|
|
|
|
|
|
| MULTI CHANNEL DECODING |
| VIDEO 1 | VIDEO 2 | DVD/LD | TV/SAT | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| MD/TAPE | CD | TUNER | AUX |
|
|
|
|
|
|
|
|
|
|
|
| INPUT MODE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MASTER VOLUME |
| |
|
|
|
|
|
|
|
|
|
|
|
|
| + |
|
|
SPEAKERS | DISPLAY |
|
|
|
|
|
|
|
| LEVEL |
|
|
|
|
|
|
|
|
|
|
|
| SURR | SET UP |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| – |
|
|
| |
|
|
| PRESET |
|
|
|
| EQ |
| NAME | CINEMA STUDIO EX | EQUALIZER |
|
|
|
|
| – | + | – |
| + |
|
|
|
|
|
| |||
| DIMMER | TUNING | TUNING |
|
| A | B | C |
|
|
| ||||
|
| MEMORY | SHIFT | FM MODE | FM | AM |
|
|
| SOUND FIELD | MULTI CH IN |
|
|
| |
|
|
|
|
|
| MUTING |
|
|
| ||||||
PHONES |
|
|
|
|
|
|
|
|
| A.F.D. | MODE | 2CH |
|
|
|
|
|
|
|
|
|
|
|
|
| ENTER |
|
|
|
|
|
1Turn off the receiver.
2Hold down ?/1 for four seconds.
The currently selected function, then the demonstration message appears in the display and the items including the following are reset or cleared:
•All preset stations are reset or cleared.
•All sound field parameters are reset to their factory settings.
•All index names (of preset stations and program sources) are cleared.
•All adjustments made with the SET UP button are reset to their factory settings.
•The sound field memorized for each program source and preset stations are cleared.
Setting up the receiver
Before you use your receiver for the first time, use the SET UP button to adjust settings to correspond to your system. You can set the following items. For details on how to adjust each setting, see the page in parentheses.
•Set the speaker size (page 17).
•Set the speaker distance (page 19).
•Select the MULTI CH IN video signal (page 45).
•Whether the display turns off or not when you press DIMMER (page 45).
Demonstration Mode
The demonstration will activate the first time you turn on the power. When the demonstration starts, the following message appears in the display :
“NOW DEMONSTRATION MODE IF YOU FINISH DEMONSTRATION PLEASE PRESS POWER KEY WHILE THIS MESSAGE APPEARS IN THE DISPLAY THANK YOU”
To cancel the demonstration
Press ?/1 to turn the receiver off while the above message is being displayed. The next time you turn the receiver on, the demonstration will not appear.
To view the demonstration
Hold down SET UP and press ?/1 to turn on the power.
Notes
•Running the demonstration will clear the receiver’s memory. For details on what will be cleared, see “Clearing the receiver's memory” on this page.
•There will be no sound when the demonstration mode is activated.
•You cannot cancel demonstration if you did not press ?/1 while the above message is being displayed. To cancel demonstration after the above message appears, press ?/1 twice to activate the demonstration again. Then, press ?/1 while the above message is being displayed.
16GB