Up Hooking
Setting and the Up System Speaker
Before You Use Your Receiver
There’s no sound from a specific component.
,Check that the component is connected correctly to audio input jacks for that component.
,Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component.
No sound is heard from one of the front speakers.
,Connect a pair of headphones to the PHONES jack to verify that sound is output from the headphones (see “qf SPEAKERS button” and “PHONES jack” on page 25).
If only one channel is output from the headphones, the component may not be connected to the receiver correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the component.
If both channels are output from the headphones, the front speaker may not be connected to the receiver correctly. Check the connection of the front speaker which is not outputting any sound.
If you encounter a problem that is not included above, see “Troubleshooting” on page 47.
22GB