5: Setting up the speakers

You can use the SET UP menu to set the size, distance and location of the speakers connected to this receiver.

1 Press ?/1 to turn on the receiver.2 Press MAIN MENU repeatedly to select “SET UP”.3 Press or repeatedly to select the parameter you want to adjust.

For details, see “Speaker setup parameters” below.

Note

Some speaker setup items may appear dimmed in the display. This means that they have been adjusted automatically due to other speaker settings or may not be adjustable.

4 Turn –/+ to select the setting you want.

The setting is entered automatically.

Note

Press ENTER if you select the setting for “SP. PATTERN X–X”.

5 Repeat steps 3 and 4 until you have set all of the items that follow.Speaker setup parameters

The initial settings are underlined.

xEASY SET UP XXX (Speaker easy setup)

YES

If you want to set up your speakers automatically, select “YES”. You can select a pre-defined speaker pattern (see the supplied “Easy Setup Guide”).

NO

If you want to adjust the settings of each speaker manually, select “NO”.

xSP. PATTERN X–X (Speaker setup pattern)

When you select “EASY SET UP YES”, select the speaker setup pattern. Turn –/+ to select the speaker setup pattern and press ENTER to enter the selection. Check your speaker pattern using the supplied “Easy Setup Guide”.

xSUB WOOFER XXX (Sub woofer selection)

YES

If you connect a sub woofer, select “YES”.

NO

If you did not connect a sub woofer, select “NO”. The front speakers are automatically set to “LARGE” and you cannot change this setting. This activates the bass redirection circuitry and outputs the LFE signals from other speakers.

In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend that you set the cut off frequency on the sub woofer as high as possible.

xFRONT SP XXXXX (Front speakers size)

LARGE

If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”. Normally, select “LARGE”.

SMALL

If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. When the front speakers are set to “SMALL”, the center, surround and surround back speakers are also automatically set to “SMALL” (unless previously set to “NO”).

xCTR SP XXXXX (Center speaker size)

LARGE

If you connect a large speaker that will effectively reproduce bass frequencies, select “LARGE”. Normally, select “LARGE”. However, if the front speakers are set to “SMALL”, you cannot set the center speaker to “LARGE”.

SMALL

If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the

center channel bass frequencies from the front speakers (if set to “LARGE”) or sub woofer.a)

18GB