Other Operations

Naming preset stations and inputs

You can enter a name of up to 8 characters for preset stations and inputs selected with INPUT SELECTOR, and display it in the receiver’s display.

1 To index a preset station

Turn INPUT SELECTOR to select the FM or AM band, then tune in the preset station you want to create an index name for (page 25).

To index an inputTurn INPUT SELECTOR to select the input you want to create an index name for.2 Press MAIN MENU repeatedly to select “CUSTOMIZE”.3 Press or repeatedly to select “NAME IN”.4 Press ENTER.

The cursor flashes and you can select a character.

5 Use or and –/+ to create an index name.

Turn –/+ to select a character, then press > to move the cursor to the next position.

Tips

•You can select the character type as follows by turning –/+.

Alphabet (upper case) t Numbers t Symbols

•To enter a blank space, turn –/+ until a blank space appears in the display.

•If you made a mistake, press < or > repeatedly until the character you want to change flashes, then turn –/+ to select the correct character.

6 Press ENTER to store the index name.

Using the Sleep Timer

You can set the receiver to turn off automatically at a specified time. Use the remote for the operation.

1 Press ALT to light up the button.

 

2 Press SLEEP while the power is on.

 

Each time you press SLEEP, the display

 

changes cyclically as follows:

 

2-00-00 t 1-30-00 t 1-00-00 t

 

 

0-30-00 t OFF

 

Other

While using Sleep Timer, “SLEEP” lights up in

the display.

 

Tip

Operations

To check the remaining time before the receiver turns

 

off, press ALT to light up the button (page 45), then

 

press SLEEP. The remaining time appears in the

 

display. If you press SLEEP again, the sleep timer will

 

be canceled.

 

39GB