You can use the SPEAKER SET UP menu to set the size, distance and location of the speakers connected to this receiver.
1 Press ?/1 to turn on the receiver.2 Press MAIN MENU repeatedly to select “ SET UP ”.3 Press or repeatedly to select the parameter you want to adjust.For details, see “SPEAKER SET UP menu parameters” below.
Note
Some speaker setup items may appear dimmed in the display. This means that they have been adjusted automatically due to other speaker settings or may not be adjustable.
4 TurnThe setting is entered automatically.
Note
Press ENTER if you select the setting for “SP. PATTERN
The initial settings are underlined.
xEASY SET UP XXX (Speaker easy setup)•YES
If you want to set up your speakers automatically, select “YES”. You can select a
•NO
If you want to adjust the settings of each speaker manually, select “NO”.
xSP. PATTERNWhen you select “EASY SET UP YES”, select the speaker setup pattern. Turn
•YES
If you connect a sub woofer, select “YES”.
•NO
If you did not connect a sub woofer, select “NO”. The front speakers are automatically set to “LARGE” and you cannot change this setting. This activates the bass redirection circuitry and outputs the LFE signals from other speakers.
•In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend that you set the cut off frequency on the sub woofer as high as possible.
xFRONT SP XXXXX (Front speakers size)•LARGE
If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”. Normally, select “LARGE”.
•SMALL
If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. When the front speakers are set to “SMALL”, the center, surround and surround back speakers are also automatically set to “SMALL” (unless previously set to “NO”).