To control a hard disc recorder

Maker

Code(s)

SONY

307, 308, 309

 

 

To control a blu-ray disc recorder

Maker

Code(s)

SONY

310, 311, 312

 

 

To control a PSX

Maker

Code(s)

SONY

313, 314, 315

 

 

Learning the commands of your components

By using the Learning function, it is possible for this remote to perform learned commands.

Setting remote control codes that are not stored in the remote

When a remote control code is not one of the presets stored in the remote, it is possible for the remote to learn the code using the Learning function.

1 Press TV ?/1 while holding downRM SET UP.

The indicator lights up.

2 Press the input button (including TV ?/1) for the component you want to control.

For example, if you are going to learn an operation for a CD player, press SA-CD/ CD.

3 Press the button you want to use for the Learning function.

The indicator turns off while a valid button is pressed, then flashes slowly.

4 Point the remote control code receiver section of the remote towards the receiver/transmitter on the remote control to be learned.

H

. m

 

M

>

X

 

 

 

-

 

x

 

 

5–10 cm

AAL001-RM Remote the Using Operations

continued

53GB