Advanced settings
Using the CUSTOMIZE menu to adjust the receiverYou can adjust various receiver settings using the CUSTOMIZE menu.
1 Press MAIN MENU repeatedly to select “ CUSTOMIZE ”.2 Press or repeatedly to select the parameter you want to adjust.For details, see “CUSTOMIZE menu parameters” below.
3 TurnThe initial settings are underlined.
x DTS 96/24 96/24 DEC XXXX (DTS 96/24 decoding mode)•AUTO
When a DTS 96/24 signal is input, it is played back at 96 kHz sampling frequencies.
•OFF
Even when a DTS 96/24 signal is input, it is played back at 48 kHz sampling frequencies.
Notes
•This parameter is valid only when you use a sound field selected with the A.F.D. button (page 30). In other sound fields, this parameter is always set to “OFF”.
•Even when a DTS 96/24 signal is input, standard 48 kHz decoding is used if any speakers are set to “SMALL” or if the sub woofer is set to “NO”.
xSB DEC XXXX(Surround back decoding mode)You can also press SURR BACK DECODING to set the surround back decoding mode (page 33).
For details on each decoding mode, see page 34.
•OFF
•AUTO
•ON
Note
You can select the surround back decoding mode only when you use a sound field selected with the A.F.D. button except for the Dolby Pro Logic IIx mode (page 30).
x A/V SYNC XXX (Time alignment)• YES |
| |
The audio output is delayed so that the time gap |
| |
between the audio output and visual display is |
| |
minimized. |
| |
Advanced | ||
• This parameter is useful when you use a large LCD | ||
• NO |
| |
The audio output is not delayed. |
| |
Notes | Adjustments | |
(Digital audio input decoding priority) | ||
or plasma monitor or a projection TV. |
| |
• This parameter is not valid when the MULTI CH IN |
| |
or ANALOG DIRECT function is selected. |
| |
x DEC. PRI. XXXX |
| |
Lets you specify the input mode for the digital signal | and | |
input to the DIGITAL IN jacks. | ||
The initial setting is “DEC. PRI. AUTO” for VIDEO 3 | Settings | |
| ||
and TV/SAT, and “DEC. PRI. PCM” for DVD, |
| |
MD/TAPE and |
| |
• AUTO |
| |
Automatically switches the input mode between |
| |
DTS, Dolby Digital, or PCM. |
| |
• PCM |
| |
PCM signals are given priority (to prevent the |
| |
interruption when playback starts). Even when other |
| |
signals are input, the sound is output. However, this |
| |
receiver cannot decode |
| |
PRI. PCM”. |
| |
Note |
| |
When set to “DEC. PRI. AUTO” and the sound from |
| |
the digital audio jacks (for |
| |
interrupted when playback starts, set to “DEC. PRI. |
| |
PCM”. |
|
xCOLOR SYS. XXXX (Color system)
(Models of area code E2/E3, AR only)Lets you select the color system.
•NTSC
•PAL
continued