You can record from a VCR, a TV or a DVD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See the operating instructions of your VCR or DVD player if you need help.
1 Select the program source to be recorded.2 Prepare the component for playing.
For example, insert a video tape you want to record into VCR.
3 Insert a blank video tape into the VCR (VIDEO 1 or VIDEO 2) for recording.4 Start recording on the recording VCR, then start playing the video tape or DVD you want to record.
Tip
You can record the sound from any audio source onto a video tape while copying from a video tape or DVD. Locate the point where you want to start recording from another audio source, select the program source, then start playback. The audio from that source will be recorded onto the audio track of the video tape instead of the audio from the original medium. To resume audio recording from the original medium, select the video source again.
Notes
•You cannot record a digital audio signal using a component connected to the analog VIDEO 1 AUDIO OUT or VIDEO 2 AUDIO OUT jacks.
•Make sure to make both digital and analog connections to the TV/SAT and DVD inputs. Analog recording is not possible if you make only digital connections.
•The analog audio signals of the current input are output from the VIDEO 1 AUDIO OUT or VIDEO 2 AUDIO OUT jacks.
•The signals input to the MULTI CH IN jacks are not output from VIDEO 1 AUDIO OUT or VIDEO 2 AUDIO OUT jacks even when MULTI CH IN is being used. The analog audio signals of the current or previously used input are output.
•Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the sources.
|
|
|
|
| Y |
|
|
PB/CB |
|
| |||||
IN | IN | OUT | IN | OUT |
|
| |
|
|
|
|
| PR/CR |
|
|
|
|
|
|
|
|
| |
VIDEO IN | VIDEO IN VIDEO OUT VIDEO IN | VIDEO OUT | VIDEO IN | VIDEO OUT | TV/SAT | DVD | MONITOR |
|
|
|
|
| IN | IN | OUT |
L | L | L |
| MONITOR | ASSIGNABLE |
| |
|
|
|
| COMPONENT VIDEO | |||
| R | R | R |
| Other |
|
|
| |||
AUDIO IN | AUDIO IN | AUDIO OUT AUDIO IN | AUDIO OUT AUDIO IN |
|
|
TV/SAT | DVD | VIDEO 2 | VIDEO 1 |
|
|
| L | L | + | – |
|
|
|
| CENTER | L |
|
|
| Operations |
|
|
|
|
|
|
| ||
| R | R | SUB | R | SUB |
|
|
|
|
| SURR | CENTER |
|
| |||
IN |
|
|
|
| ||||
FRONT SURROUND BACK | WOOFER | OUT WOOFER |
| SP |
| |||
APE |
| MULTI CH IN |
| 2ND ZONE PRE OUT |
|
| ||
You can select the analog audio signals you want to output to a stereo amplifier in another room or zone.
Press 2ND ZONE repeatedly to select the analog audio signals you want to output.
Each time you press the button, the audio source changes cyclically as follows:
SOURCE*1 t MD/TAPE t
tTUNER*2
*1 The audio signals of the current input is output. *2 The audio signals of the last selected TUNER
function (AM/FM) is output.
Tips
•Only signals from components connected to the analog input jacks are output through the 2ND ZONE OUT jacks. No signals are output from components connected to only the digital input jacks.
•When “SOURCE” is selected, the signals input to the MULTI CH IN jacks are not output from the 2ND ZONE OUT jacks even when MULTI CH IN is selected. The analog audio signals of the current input are output.
continued