Manuals / Brands / Home Audio / Stereo Receiver / Sony / Home Audio / Stereo Receiver

Sony STR-DG710 Connecting a TV, Note, Tips, 19GB, Started Getting, CComponent video cord (not supplied), AAudio cord (not supplied) BVideo cord (not supplied)

1 80

Download 80 pages, 1.36 Mb

Connecting a TV

The image from a video component connected to this receiver can be displayed on a TV screen.

It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components.

Note

Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted.

Tips

•You can watch the selected input image when you connect the MONITOR OUT jack to a TV or projector.

•The sound of the TV is output from the speakers connected to the receiver if you connect the audio output jack of the TV and the TV IN jacks of the receiver.

Started Getting

TV

Audio signals				Video signals

			A				B			C
DIGITAL			DVD IN	VIDEO 2/BD IN			OUT
(ASSIGNABLE)
OPTICAL	ANTENNA				HDMI
SAT					HDMI
IN
	AM							Y
VIDEO 1	AM
VIDEO 1
IN
								PB/CB
COAXIAL
DVD
IN								PR/CR
			VIDEO IN VIDEO IN VIDEO OUT		VIDEO IN	VIDEO OUT	SAT IN DVD IN VIDEO 1 IN	MONITOR OUT	L	L	SURROUND BACK
			VIDEO IN VIDEO IN VIDEO OUT		VIDEO IN	VIDEO OUT	SAT IN DVD IN VIDEO 1 IN	MONITOR OUT
DMPORT				DVD		MONITOR	COMPONENT VIDEO
							R	L
		L	L	L
						AUDIO OUT
		R	R	R			FRONT B		R	R
	IN	IN	AUDIO IN	AUDIO OUT	AUDIO IN	SUB	FRONT B		FRONT A	SURROUND	CENTER
	SA-CD/CD	TV	SAT	VIDEO 1		WOOFER			SPEAKERS

AAudio cord (not supplied) BVideo cord (not supplied)CComponent video cord (not supplied)

19GB

Contents

Page WARNING For customers in Europe About This Manual The instructions in this manual are for model About area codes *Manufactured under license from Dolby Laboratories “DTS” Table of Contents Description and location of parts L 2CH SUR BACK DECODING N SLEEP O DIMMER About the indicators on the display LFE SP A ;D EX ;PL IIx ;PL G DTS O Playback DTS-ES channel DTS 96/24 Rear panel ADIGITAL INPUT/OUTPUT section CSPEAKERS section Connects to a IN jacks Remote commander continued A TV ?/1 on or off AV ?/1 Press to turn on or off the operate (page 67) m/Mb) Press to player ray disc player or blu-raydisc player S same time to select the channel entry mode, either >10/x VCR, satellite tuner or CD 1: Installing speakers 2: Connecting speakers 3a: Connecting the audio components 3b: Connecting the video components Connecting components with HDMI jacks HDMI feature AHDMI cable (not supplied) 17GB Notes on HDMI connections •The multi/stereo area audio signals of a Super Audio CD are not output In this case, check the specification of the connected component •Refer to the operating instructions of each component connected for details We do not recommend using a Connecting a TV Tips AAudio cord (not supplied) BVideo cord (not supplied) CComponent video cord (not supplied) 19GB Connecting a DVD player/DVD recorder The following illustration shows how to connect a DVD player/DVD recorder Connecting a DVD player ACoaxial digital cord (not supplied) BVideo cord (not supplied) 20GB Connecting a DVD recorder AOptical digital cord (not supplied) BAudio cord (not supplied) CVideo cord (not supplied) DComponent video cord (not supplied) 21GB Connecting a satellite tuner/ set-topbox •Do not bend or tie optical digital cords AOptical digital cord (not supplied) BAudio cord (not supplied) 22GB Connecting components with analog video and audio jack CAudio/video cord (not supplied) 23GB 4: Connecting the antennas (aerials) 5:Preparing the receiver and the remote 6:Selecting the speaker system 7:Calibrating the appropriate settings automatically Performing Auto Calibration 1 Press AMP MENU 2 Press AUTO CAL Measurement starts in 5 seconds and the display changes as follows: A.CAL [5] t A.CAL [4] t A.CAL [3] Error and warning codes When error codes appear tENTER a)Appears when there are more than one error code To rectify the error 8:Adjusting the speaker levels and balance 5 Press V/v repeatedly to select “T. TONE Y” The test tone is output from each speaker in sequence as follows: For details, see “Adjusting the level (LEVEL menu)” (page 39) •The adjusted value is shown on the display during adjustment 7 Repeat steps 1 to 5 to select “T. TONE N” Selecting a component Listening/Watching a component Watching a DVD 1 Turn on the TV and DVD player 3 Press DVD You can also use INPUT SELECTOR on this receiver to select “DVD” 4 Switch the input of the TV so that an image of the DVD is displayed Navigating through menus Overview of the menus Menu Parameters Settings Initial 37GB 38GB Adjusting the level Adjusting the equalizer Settings for the surround sound Using the surround back decoding mode (SB DEC) Types of the surround back decoding functions xSB AUTO Output Surround back Settings for the tuner Settings for the audio Settings for the video Settings for the system xCNT SPK (Center speaker) xSUR SPK (Surround speakers) The surround back speaker will be set to the same setting If you have not connected surround speakers, select “NO” xSB SPK (Surround back speaker) xFRT DIST. (Front speaker distance) xCNT DIST. (Center speaker distance) 1.5meters closer to your listening position (B) xSL DIST. (Surround left speaker distance) xSR DIST. (Surround right speaker distance) xSUR POS (Surround speaker position) •SIDE/LO •SIDE/HI •BEHD/LO Enjoying Dolby Digital and DTS Surround sound Types of A.F.D. mode Decoding A.F.D. mode Multi channel Effect Selecting a preprogrammed sound field For details, see “Types of sound field available” (page 51) 50GB Types of sound field available Sound field for Movie CINEMA STUDIO EX A About DCS (Digital Cinema Sound) Sound fields with DCSmark use DCS technology About CINEMA STUDIO EX modes The CINEMA STUDIO EX modes consist of the following three elements •Virtual Multi Dimension Using only the front speakers Listening to the sound without any adjustment 2 While holding down 2CH, press ?/1 Listening to FM/AM radio 2 Press TUNING + or TUNING – Using the controls on the receiver In case of poor FM stereo reception Direct tuning 2 Press D.TUNING 3 Press the numeric buttons to enter the frequency 4 Press ENTER If you cannot tune in a station Presetting radio stations Tuning to preset stations 2 Press PRESET + or PRESET – repeatedly to select the preset station you want Each time you press the button, you can select a preset station as follows: 2Press TUNING MODE repeatedly to select “PRESET T.” 3Turn TUNING +/– to select the preset station you want Using the Radio Data System (RDS) (Models of area code CEL, CEK only) •RDS is operable only for FM stations Receiving RDS broadcasts 58GB Displaying RDS information While receiving an RDS station, press DISPLAY repeatedly on the receiver Description of program types Program type Description Switching between digital and analog audio Enjoying the DIGITAL MEDIA PORT Connecting the DIGITAL MEDIA PORT adapter AVideo cord (not supplied) To detach the DIGITAL MEDIA PORT adapter from DMPORT jack Press and hold both sides of the connector and then pull out the connector 62GB Listening to a connected component through DMPORT connection 1 Press DMPORT You can also use the INPUT SELECTOR on the receiver to select “DMPORT” 2 Start playback of the connected component Initial setting: –NONE Listening to digital sound from other inputs Naming inputs Changing the display Using the Sleep Timer Recording using the receiver Changing button assignments Glossary xDolby Pro Logic xDTS-ES xDTS Neo:6 xDolby Surround (Dolby Pro Logic) xDTS 96/24 Precautions Troubleshooting •Check the HDMI connection •You cannot listen to the Super Audio CD by connecting HDMI The left and right sounds are unbalanced or reversed •Check that the speakers and components are connected correctly and securely •Adjust the balance parameters using the LEVEL menu Video Tuner The RDS information that you want does not appear Remote commander The remote does not function •Point the remote at the remote sensor on the receiver •Remove any obstacles in the path between the remote and the receiver Specifications General Power consumption Supplied accessories For details on the area code of the component you are using, see page Design and specifications are subject to change without notice Index Page Page (1) Sony Corporation