Sony STR-DG710 Direct tuning, 55GB, 4 Press ENTER, 2 Press D.TUNING, Operations Tuner, 2 Press TUNING + or TUNING –, If you cannot tune in a station

2 Press TUNING + or TUNING –.

Press TUNING + to scan from low to high; press TUNING – to scan from high to low.

The receiver stops scanning whenever a station is received.

Using the controls on the receiver

1Turn INPUT SELECTOR to select the FM or AM band.

2Press TUNING MODE repeatedly to select “AUTO T.”.

3Turn TUNING +/–.

In case of poor FM stereo reception

If the FM stereo reception is poor and “ST” flashes on the display, select monaural audio so that the sound will be less distorted.

Press FM MODE repeatedly until the “MONO” indicator lights up on the display. To return to stereo mode, press FM MODE repeatedly until the “MONO” indicator on the display does not light up.

Direct tuning

Enter the frequency of a station directly by using the numeric buttons.

			SYSTEM STANDBY
	VIDEO 1	VIDEO 2	VIDEO 3	DVD
	SAT	TV	SA-CD/CD	TUNER	1
	2CH	A.F.D.	MOVIE	MUSIC
	1	2	AMP MENU
			3
3	4	5	6	AUTO CAL
					2
	7	8	9	D.TUNING
				D.SKIP
	>10/		MEMORY	DVD MENU
	-	0/10	ENTER		4
	CLEAR			FM MODE

1 Press TUNER repeatedly to select the FM or AM band.

You can also use INPUT SELECTOR on the receiver.

2 Press D.TUNING.3 Press the numeric buttons to enter the frequency.

Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0

If you have tuned in an AM station, adjust the direction of the AM loop antenna (aerial) for optimum reception.

4 Press ENTER.

You can also use MEMORY/ENTER on the receiver.

If you cannot tune in a station

Make sure you have entered the right frequency. If not, repeat steps 2 to 4. If you still cannot tune in a station, the frequency is not used in your area.

55GB

Operations Tuner